Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Sam Goldheart-

Modifica approvata da Sam Goldheart

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use athe point of a spudger to loosen the right speaker cable's connector from its socket on the logic board.
[* icon_note] It is useful
to push downward on both short sideseither side of the right speaker cable connector to "walk" it out of its socket. Be careful withsocket on the corners of the connectors, they can be easily broken off.
[* black] Pull the connector downwards to remove it from its socket
logic board.
[* black] Use athe point of a spudger to loosen the right speaker cable's connector from its socket on the logic board.
[* icon_note] It is useful
to push downward on both short sideseither side of the right speaker cable connector to "walk" it out of its socket. Be careful withsocket on the corners of the connectors, they can be easily broken off.
[* black] Pull the connector downwards to remove it from its socket
logic board.