Salta al contenuto principale

Modifiche al passo #13

Modifica in base a Marco Campos-

Modifica approvata da Justin Ogihara

Prima di
Dopo il
Invariato

Righe Passo

-[* black] remove the connectors of the screen.
-[* black] be careful with the connector (the bigger of the two.) (With the HP SPARE sticker)
-[* black] Remove the sticker ( HP spare) And pull the connector out of the socket.
+[* red] remove the connectors of the screen.
+ [* icon_note] be careful with the connector (the bigger of the two.) (With the HP SPARE sticker)
+[* orange] Remove the sticker ( HP spare) And pull the connector out of the socket.
[* icon_note] if you put back the screen and the connector afterwards , maybe you can tape the LCD cable to the motherboard with electrical tape. It will fit better then and you have less troubles with the screen.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione