Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Marco Campos-

Modifica approvata da Justin Ogihara

Prima di
Dopo il
Invariato

Righe Passo

[* black] Now remove the HDD and the RAM
- [* black] Remove the HDD by removing the three screws and pulling the Sata connector from the motherboard.
- [* black] Remove the RAM by pulling apart the clips on either side of the top stick. The stick should pop up, then pull it out. Repeat for the bottom stick.
+ [* red] Remove the HDD by removing the three screws and pulling the Sata connector from the motherboard.
+ [* orange] Remove the RAM by pulling apart the clips on either side of the top stick. The stick should pop up, then pull it out. Repeat for the bottom stick.

Immagine 2

Vecchia Versione

Nuova Versione