Salta al contenuto principale

Modifiche al passo #7

Modifica in base a Roxanne Hoffman-

Modifica approvata da Roxanne Hoffman


Righe Passo

[* red] Remove the black and white wires by desoldering them from the circuit board attached to the case.
[* icon_note] For proper soldering and desoldering techniques reference [guide|750|How To Solder and Desolder Connections].
[* icon_caution] Soldering requires the iron to be at hot temperatures and can cause burns. Wear safety glasses as needed. Be extremely careful with the cables in this step as they could melt, burn, or break.

Immagine 1

Nessuna immagine precedente.