Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #4

Modifica in base a Andrew Shotwell-

Modifica approvata da Marty Rippens

Prima di
Dopo il
Invariato

Righe Passo

[* black] To check the power supply of the clock, locate the holder which connects to theelectrical connector and find the pin supplied with 12v+ on it which supplies the power (12v) to the clock.
[* black] To check the power supply of the clock, locate the holder which connects to theelectrical connector and find the pin supplied with 12v+ on it which supplies the power (12v) to the clock.
[* icon_note] For testing, use a 12v bulb with a holder and a test probe connected to one end of the bulb.
[* black] Find a -veground supply near bynearby ( the best place would be the key hole) and put one end of the wire in to it.
[* black] Find a -veground supply near bynearby ( the best place would be the key hole) and put one end of the wire in to it.
[* black] Put the test probe to the holder clamp and see whether the bulb lights up while the ignition is off.