Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Brian Marchini-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] To install the new RAM, grip the new chip exactly the same way as you gripped the old chip when you removed it.
[* black] Insert the gold leads of the RAM into the connection at the same angle the original chip was raised at after the tabs were released.
[* icon_note] There is a raised tab on the connection that mates with a slit in the RAM to ensure you do not put the chip in upside down.

Immagine 1

Nessuna immagine precedente.

Aggiunto