Salta al contenuto principale

Modifiche al passo #4

Modifica in base a rich-

Modifica approvata da Adam O'Camb

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Make sure the SD card has been removed. With a plastic opening tool pry off the lower case starting at the bottom edge and working around the perimeter.
[* black] Make sure the SD card has been removed. With a plastic opening tool pry off the lower case starting at the bottom edge and working around the perimeter.
[* red] Two ribbon cables connect the case to the circuit board. Be careful to not pull the case too hard and rip the ribbon cables.