Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #14

Modifica in base a Evan Noronha-

Modifica approvata da Evan Noronha

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use the flat end of a spudger to disconnect the front-facing camera connector from the logic board.
[* icon_caution] Pry up only on the connector—'''not''' on the socket itself.
[* black] Fold the front-facing camera cable out of the way.
[* icon_reminder] There is a bit of conductive adhesive between the gold-colored cable contacts. Be sure to apply pressure to readhere these contacts during reassembly.