Modifiche al passo #2
Modifica di Sarah LeClair —
Modifica approvata da Sarah LeClair
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Remove the RAM cover panel screws with a #1 Phillips head screwdriver as indicated in the picture, then use a flat edge tool to pry the cover off. |
|---|---|
| - | [* black] Using your fingers, push the RAM tabs that secure the RAM tabs outward (away from the RAM). The RAM should then pop up, gently remove the RAM pulling away from the connection. (Continue this process until all RAM has been removed from the device). |
| + | [* black] Unscrew the RAM cover panel screws with a #1 Phillips head screwdriver. Then pry the RAM cover panel off with a flat edge tool. |
| + | [* red] Push the tabs that secure the RAM outward (away from the RAM) using your fingers. The RAM should then pop up. |
| + | [* black] Pull the RAM away from the connection to remove. Continue this process until all RAM drives have been removed from the device. |