Skip to main content

Modifiche al passo #1

Modifica in base a Patrick Michniuk-

Modifica approvata da Patrick Michniuk

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Loosen the 3mm Phillips #0 screw from the back of the WiFi card backplate.
[* black] Theicon_note] The screw will remain in the backplate.
[* black]
Lift upwards on the back plate to remove it.
[* black] Theicon_note] The screw will remain in the backplate.
[* black]
Lift upwards on the back plate to remove it.