Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Brittany McCrigler-

Modifica approvata da Brittany McCrigler

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Flip the circuit board over so back is facing out.
[* icon_caution] There are capacitors all over the back side of the board. Be careful not to touch these capacitors (blue cylinders) as they can discharge—giving you a shock.
[* red] Remove the eight wires from the circuit board with tweezers. If the wires are tight 8" needle nose pliers might work better.
[* orange] There is one wire to be removed in the orange box.
[* yellow] There are two wires to be removed in the the yellow box.
[* green] In the green box there are five wires to be removed.