Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Jack Harrison-

Modifica approvata da Jack Harrison

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Gently pull the circuit board away from the front faceplate.
[* black] Note: There is aBe careful not to tug the wire connecting the circuit board to the speaker which willspeaker, as it is still be attached to the frontplate, so be careful.
[*
faceplate.
[*
black] Note: Do not touch the the button contacts on the circuit board (the button contacts are shown in the red box of the second picture). This can cause long-term damage to the radio unless you properly clean them (see [guide|24218|Repairing Motorola TALKABOUT FV700 Two Way Radio Button Contacts Guide]).
[* black] Note: There is aBe careful not to tug the wire connecting the circuit board to the speaker which willspeaker, as it is still be attached to the frontplate, so be careful.
[*
faceplate.
[*
black] Note: Do not touch the the button contacts on the circuit board (the button contacts are shown in the red box of the second picture). This can cause long-term damage to the radio unless you properly clean them (see [guide|24218|Repairing Motorola TALKABOUT FV700 Two Way Radio Button Contacts Guide]).