Salta al contenuto principale

Modifiche al passo #8

Modifica in base a Mitchell Weiss-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Remove tape from both sidesInsert the ribbon connector of the new LCD screen into the slot in which the old LCD screen was attached.
[* black] Press the new LCD screen into place and lower the copper frame back down.
[* black] Remove tape from both sidesInsert the ribbon connector of the new LCD screen into the slot in which the old LCD screen was attached.
[* black] Press the new LCD screen into place and lower the copper frame back down.

Immagine 1

Nessuna immagine precedente.

Aggiunto