Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Kyle Schober-

Modifica approvata da Kyle Schober

Eliminato
Aggiunto
Invariato

Righe Passo

[* blackorange] Set the blaster on its side with the screws facing up (the blaster will be placed on its left side). Remove all 14 phillips head, 8.2 mm screws and set them aside.
[* blackorange] Set the blaster on its side with the screws facing up (the blaster will be placed on its left side). Remove all 14 phillips head, 8.2 mm screws and set them aside.
[* black] Lift the side of the blaster off exposing its internal parts.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione