Modifiche al passo #9
Modifica in base a iRobot-
- Eliminato
- Aggiunto
- Invariato
Righe Passo
| [* black] Apply a new layer of thermal paste to the copper heat conduit. |
| [* icon_reminder] When replacing the logic board, make sure all cables are routed around and above - not under - it, and to connect the two cables that do go beneath before pushing the board into place. |
| [* icon_reminder] Place the logic board back in the computer, trying not to move it around once the processor has come into contact with the newly-applied thermal paste. |
Immagine 1
Nessuna immagine precedente.
Aggiunto