Salta al contenuto principale

Modifiche al passo #6

Modifica in base a iRobot-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Grasp the logic board at the left edge with one hand and at the thinnest section with the other hand. Lift the left edge of the board up to approximately a 30 degree angle (if you don't have your protractor handy, just lift until the DVI port clears the right hinge).
[* black] Once the logic board clears the ports, slide it out to the left.

Immagine 1

Nessuna immagine precedente.

Aggiunto