Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Ruben Puentes-

Modifica approvata da Ruben Puentes

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert wisdom herered] Remove the five 5mm screws located throughout the motherboard with the screwdriver. Use the T10 Torx screwdriver head.
[* yellow] Pull up on each metal tab located at the rear of the projector. There are 5 tabs.
[* icon_caution] Do not pull up on the metal tabs too hard or too fast because they can break easily
.
[* black] Insert wisdom herered] Remove the five 5mm screws located throughout the motherboard with the screwdriver. Use the T10 Torx screwdriver head.
[* yellow] Pull up on each metal tab located at the rear of the projector. There are 5 tabs.
[* icon_caution] Do not pull up on the metal tabs too hard or too fast because they can break easily
.

Immagine 1

Vecchia Versione

Nuova Versione