Salta al contenuto principale

Modifiche a questo Step

Modifica di Edgar Palacios

Modifica approvata da Edgar Palacios

Prima di
Dopo il
Invariato

Righe Passo

+[* red] Remove the two screws underneath the circuit board. They are located at the corners of the trapezoid.
+[* green] Slowly pull up on the motherboard. Avoid tangling the wires and pulling to hard on the white electrical strip located near the lens.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto