Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche a questo Step

Modifica in base a Edgar Palacios-

Modifica approvata da Edgar Palacios

Prima di
Dopo il
Invariato

Righe Passo

[* red] Remove the two screws underneath the circuit board. They are located at the corners of the trapezoid.
[*
blue] Slowly pull up on the motherboard. Avoid tangling the wires and pulling too hard on the white electrical strip located near the lens. Wiggle the board gently if necessary.
[* red] Remove the two screws underneath the circuit board. They are located at the corners of the trapezoid.
[*
blue] Slowly pull up on the motherboard. Avoid tangling the wires and pulling too hard on the white electrical strip located near the lens. Wiggle the board gently if necessary.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Eliminato

Immagine 3

Eliminato