Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Nishant Mattu-

Modifica approvata da Nishant Mattu

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Flip the projector right-side up and turn it so that the back ports are facing you.
[* green] Remove the 7mm metallic hex screws using the flat-head screwdriver.
[* red] Remove the two black 10mm screws using the T10 Torx 10 screwdriver head. The screws are located at the center of the back panel.
[* red] Remove the two black 10mm screws using the T10 Torx 10 screwdriver head. The screws are located at the center of the back panel.