Aggiusta le tue cose Community Store

Modifiche al passo #1

Modifica di Kristen Gismondi —

Modifica approvata da Kristen Gismondi

Prima di
Dopo il
Invariato

Righe Passo

[* red] Flip the projector right-side up and turn it so that the back ports are facing you.
-[* orange] Remove the 7mm metallic hex screws using the flat-head screwdriver.
-[* green] Using the T10 Torx screwdriver head remove the two black 10mm screws, located at the center of the back panel.
+[* orange] Remove the 7 mm metallic screws using the flat-head screwdriver.
+[* green] Using the T10 Torx screwdriver, remove the two black 10 mm screws located at the center of the back panel.