Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Nishant Mattu-

Modifica approvata da Nishant Mattu

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Unplug the speaker wires from the top circuit board by simultaneously squeezing the sides and pulling.
[* blue] Remove the ten 5.5mm screws located on the lid circuit board with the Phillips 0 screwdriverscrewdriver.
[* blue] Remove the ten 5.5mm screws located on the lid circuit board with the Phillips 0 screwdriverscrewdriver.
[* icon_caution] Carefully hold the lid in place as you remove the screws to avoid ripping the electrical strip from the circuit board.
[* black] Slowly bring down the top circuit board while holding on to the plastic bottom strip.