Modifiche a questo Step
Modifica di Nishant Mattu —
Modifica approvata da Nishant Mattu
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* red] Unplug the speaker wires from the top circuit board by simultaneously squeezing the sides and pulling. | |
| - | [* blue] Remove the ten 5.5mm screws located on the lid circuit board with the Phillips 0 screwdriver |
| + | [* blue] Remove the ten 5.5mm screws located on the lid circuit board with the Phillips 0 screwdriver. |
| [* icon_caution] Carefully hold the lid in place as you remove the screws to avoid ripping the electrical strip from the circuit board. | |
| - | [* black] Slowly bring down the top circuit board |
| + | [* black] Slowly bring down the top circuit board while holding on to the plastic bottom strip. |