Modifiche al passo #2
Modifica di Ruben Puentes —
Modifica approvata da Ruben Puentes
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* red] Remove the two 77mm screws that are located nearest to the back panel ports. Use the T10 Torx screwdriver head. | |
| [* yellow] Next, remove the two 10mm screws located near the lens side with the T10 Torx screwdriver head. | |
| + | [* black] Flip the projector back over. |
| [* icon_caution] Lift up the main lid cautiously to avoid ripping the electrical strips. |