Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Nishant Mattu-

Modifica approvata da Nishant Mattu

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Remove the two 77mm screws that are located nearest to the back panel ports. Use the torx 10 screwdriver head.
[* yellow] Next, remove the two 10mm screws located near the lens side with the torx 10 screwdriver head.
[* icon_caution] Then proceed to liftingLift up the main lid cautiously to avoid ripping the electrical strips.
[* icon_caution] Then proceed to liftingLift up the main lid cautiously to avoid ripping the electrical strips.