Modifiche al passo #2
Modifica di Kristen Gismondi —
Modifica approvata da Kristen Gismondi
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* red] Flip the projector over. | |
| [* orange] Use the T10 Torx screwdriver head to remove the two 77mm screws located nearest to the back panel ports. | |
| - | [* yellow] |
| + | [* yellow] Remove the two 10mm screws located near the lens side with the T10 Torx screwdriver head. |
| [* green] Flip the projector back over. | |
| [* icon_caution] Lift up the main lid cautiously to avoid ripping the electrical ribbons. |