Modifiche al passo #3
Modifica di Edgar Palacios —
Modifica approvata da Edgar Palacios
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] Unplug the speaker wires from the top circuit board |
|---|---|
| - | [* blue] |
| + | [* red] Unplug the speaker wires from the top circuit board by simultaneously squeezing the sides and pulling. |
| + | [* blue] Remove the ten 5.5mm screws located on the lid circuit board with the Phillips 0 screwdriver |
| [* icon_caution] Carefully hold the lid in place as you remove the screws to avoid ripping the electrical strip from the circuit board. | |
| [* black] Slowly bring down the top circuit board, while holding on to the plastic bottom strip. |