Aggiusta le tue cose Community Store

Modifiche al passo #2

Modifica di Kristen Gismondi —

Modifica approvata da Kristen Gismondi

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Remove the two 77mm screws that are located nearest to the back panel ports. Use the T10 Torx screwdriver head.
-[* orange] Remove the two 10mm screws located near the lens side with the T10 Torx screwdriver head.
-[* yellow] Flip the projector back over.
-[* icon_caution] Then, cautiously proceed to lift the main lid to avoid ripping the electrical strips.
+[* red] Remove the two 77mm screws that are located nearest to the back panel ports using a T10 Torx screwdriver.
+[* orange] Remove the two 10mm screws located near the lens side with the T10 Torx screwdriver.
+[* black] Flip the projector back over.
+[* icon_caution] Cautiously lift the main lid to avoid ripping the electrical strips.