Modifiche al passo #2
Modifica di MF_Writing —
Modifica approvata da MF_Writing
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* red] Remove the two 77mm screws that are located nearest to the back panel ports. Use the T10 Torx screwdriver head. | |
| [* yellow] Next, remove the two 10mm screws located near the lens side with the T10 Torx screwdriver head. | |
| [* black] Flip the projector back over. | |
| - | [* icon_caution] Then, proceed to lift |
| + | [* icon_caution] Then, cautiously proceed to lift the main lid to avoid ripping the electrical strips. |