Modifiche al passo #1
Modifica di route —
Modifica approvata da Andrew Optimus Goldheart
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Flip the projector right-side up and turn it so that the back ports are facing you. | |
| [* green] Remove the 7mm metallic hex screws using the flat-head screwdriver | |
| - | [* red] Remove the two black 10mm screws using the T10 Torx screwdriver head. The screws are located at the center of the back panel |
| + | [* red] Remove the two black 10mm screws using the T10 Torx screwdriver head. The screws are located at the center of the back panel. |