Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Michelle Horsfield-

Modifica approvata da Taylor Dixon

Prima di
Dopo il
Invariato

Righe Passo

[title] Remove the drive belt and springed gear
[* black] You can remove the belt that drives the gearbox at this point - if this has worn out then only the high speed attachment will have been working. It will lift off nicely with a screwdriver.
[* black] The large gear then needs to be gripped, and the "dog" on top of it needs to be removed.
[* black]
You'll need to hold the gear in place (by holding the bit that grips the K attachment - get someone else to hold onto it tight) and turn the dogdog with a spanner. Eventually the person holding will feel it release, and watchyou can unscrew the final turn carefully so the spring doesn't fly off!
[* black] The large gear then needs to be gripped, and the "dog" on top of it needs to be removed.
[* black]
You'll need to hold the gear in place (by holding the bit that grips the K attachment - get someone else to hold onto it tight) and turn the dogdog with a spanner. Eventually the person holding will feel it release, and watchyou can unscrew the final turn carefully so the spring doesn't fly off!
[* black] Apologies for the cake/belt continuity errors in this set - some are taken during reassembly