Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Sarah-

Modifica approvata da Sarah

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Keep holding the partially separated panel open. ItsIt's easiest to do this by wedging a spudger into the creaseopening but can also be held open by your hands.
[* black] Keep holding the partially separated panel open. ItsIt's easiest to do this by wedging a spudger into the creaseopening but can also be held open by your hands.
[* red] Rotate the Xbox to the left to locate the clip connecting the front panel to the body.
[* black] Insert the spudger inside the gap to release the clip. This may require some wiggling of the spudger. The clip will pop off, making the front panel looser.