Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Jennifer-

Modifica approvata da Jennifer

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Keep holding the partially separated panel, and you will findpanel open. Its easiest to do this by wedging a clip onspudger into the crease but can also be held open by your hands.
[* red] Rotate the Xbox to
the left side.to locate the clip connecting the front panel to the body.
[* black]
Insert the spudger inside and the gap to release the clip. This may require some wiggling of the spudger. The clip will pop off, letting the front panel come off.
[* black] Keep holding the partially separated panel, and you will findpanel open. Its easiest to do this by wedging a clip onspudger into the crease but can also be held open by your hands.
[* red] Rotate the Xbox to
the left side.to locate the clip connecting the front panel to the body.
[* black]
Insert the spudger inside and the gap to release the clip. This may require some wiggling of the spudger. The clip will pop off, letting the front panel come off.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto