Skip to main content

Modifiche al passo #1

Modifica in base a Alec Cheung-

Modifica approvata da Alec Cheung

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Useicon_caution] There is a Phillips #1 screwdriverplastic sheet in between the radio motherboard (the upper brown board) and the audio port motherboard (the lower green board) coming from the right speaker housing. Be careful when removing the back panel as to removenot damage the two 8mm screws encasingboards against the iPod adapter nearplastic sheet.
[* black] Remove
the topbottom panel of the deviceboombox by carefully pulling the panel straight backwards from the boombox until the motherboards are free.
[* red] Useicon_caution] There is a Phillips #1 screwdriverplastic sheet in between the radio motherboard (the upper brown board) and the audio port motherboard (the lower green board) coming from the right speaker housing. Be careful when removing the back panel as to removenot damage the two 8mm screws encasingboards against the iPod adapter nearplastic sheet.
[* black] Remove
the topbottom panel of the deviceboombox by carefully pulling the panel straight backwards from the boombox until the motherboards are free.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente

Aggiunto