Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #7

Modifica in base a Larsson Johnson-

Modifica approvata da Larsson Johnson

Prima di
Dopo il
Invariato

Righe Passo

[* black] Slide the spudger firmly along the right side of the battery, loosening the adhesive between the case and battery.
[* green] Inserticon_caution] Flux cables run vertically down the phone underneath the battery and can be damaged easily. Make sure to only place the spudger in the bottom center (circledindicated area.
[* red] Insert the spudger
in green in photo two)the bottom-center to further loosen the adhesive, and carefully leverageadhesive. Carefully separate the battery from the phonephone by sliding the spudger vertically underneath the battery and prying up. This may take some time and work as the adhesive is very strong.
[* black] Slide the spudger firmly along the right side of the battery, loosening the adhesive between the case and battery.
[* green] Inserticon_caution] Flux cables run vertically down the phone underneath the battery and can be damaged easily. Make sure to only place the spudger in the bottom center (circledindicated area.
[* red] Insert the spudger
in green in photo two)the bottom-center to further loosen the adhesive, and carefully leverageadhesive. Carefully separate the battery from the phonephone by sliding the spudger vertically underneath the battery and prying up. This may take some time and work as the adhesive is very strong.

Immagine 2

Vecchia Versione

Nuova Versione