Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Andy Maness-

Modifica approvata da Andy Maness

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] While pulling the bottom down, remove the back of the camera.
[* icon_caution]
Be careful no to pull too hard on the back as it is connected via a ribbon cable. Be sure to disconnect this cable on the main board.
[* black] While pulling the bottom down, remove the back of the camera.
[* icon_caution]
Be careful no to pull too hard on the back as it is connected via a ribbon cable. Be sure to disconnect this cable on the main board.