Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Gerik Kubiak-

Modifica approvata da Gerik Kubiak

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] While pulling the bottom down, remove the back of the camera.
[* icon_caution] Be careful not to pull too hard on the back as it is connected via a ribbon cable. Be sure to disconnect this cable on the main board.
[* black] TALK ABOUT SPUDGERicon_note] To disconnect the ribbon cable pull the small black tab upward and pull gently on the cable.
[* black] TALK ABOUT SPUDGERicon_note] To disconnect the ribbon cable pull the small black tab upward and pull gently on the cable.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione