Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Gerik Kubiak-

Modifica approvata da Gerik Kubiak

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] While pulling the bottom down, remove the back of the camera. Be careful no to pull too hard on the back as it is connected via a ribbon cable. Be sure to disconnect this cable on the main boardboard.
[* black] While pulling the bottom down, remove the back of the camera. Be careful no to pull too hard on the back as it is connected via a ribbon cable. Be sure to disconnect this cable on the main boardboard.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto