Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #2

Modifica in base a Andrew-

Modifica approvata da Andrew

Prima di
Dopo il
Invariato

Righe Passo

[* blackred] Orient the retaining clip awaybracket upwards (away from the main body of unitunit.).
[* blackicon_note] This will allow the spout to release from the dust cover.
[* icon_caution] Use caution when movingDo not push the clip as it has a limitedretaining bracket beyond its designed range of motion. ItIt may snap if you force the clip too far beyondmuch force is applied outside its limit.
[* blackred] Orient the retaining clip awaybracket upwards (away from the main body of unitunit.).
[* blackicon_note] This will allow the spout to release from the dust cover.
[* icon_caution] Use caution when movingDo not push the clip as it has a limitedretaining bracket beyond its designed range of motion. ItIt may snap if you force the clip too far beyondmuch force is applied outside its limit.

Immagine 1

Vecchia Versione

Nuova Versione