Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Courtney Elliott-

Modifica approvata da Courtney Elliott

Prima di
Dopo il
Invariato

Righe Passo

[* icon_note] Use a large flat-head screwdriver and a small flat-head screwdriver to remove the base.
[* black] Push the tab with the large flat-head screwdriver while the small flat-head screwdriver slips under the metal.
[* black] Compress the tabs (one at a time, one on each side) holding the sphere into the base and lift the sphere off of the base.
-[* black] If the metal brackets come off of the sphere, put them back on the plastic piece shown in the photo.
+[* icon_note] If the metal brackets come off of the sphere, put them back on the plastic piece shown in the photo.