Modifiche al passo #1
Modifica di Andrew Bookholt —
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* icon_note] If you are reusing the LCD, it is not necessary to peel the ambient light sensor off the back face of the LCD. |
|---|---|
| [* black] Use the edge of a plastic opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame. | |
| [* black] Once you've gained enough clearance, peel the ambient light sensor off the LCD. | |
| [* icon_caution] Be careful not to crease the ambient light sensor below its top section, as the portion with adhesive applied may break off. | |
| [* icon_reminder] If necessary, attach the plastic view window to your new ambient light sensor before installation. |