Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #3

Modifica in base a Kevin Daily-

Modifica approvata da Kevin Daily

Prima di
Dopo il
Invariato

Righe Passo

[* red] Locate theUsing a Phillips __#1 screwdriver, locate and unscrew the M4 x 16mm screw holding the bindingheel strap connector to the binding.
[* yelloworange] Use a Flathead screwdriver to anchor the screwbacking bracket located on the inside of the binding.
[* black] Then using a Phillips # 0 screwdriver, unscrew the binding connector and set it aside.
[* red] Locate theUsing a Phillips __#1 screwdriver, locate and unscrew the M4 x 16mm screw holding the bindingheel strap connector to the binding.
[* yelloworange] Use a Flathead screwdriver to anchor the screwbacking bracket located on the inside of the binding.
[* black] Then using a Phillips # 0 screwdriver, unscrew the binding connector and set it aside.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione