Salta al contenuto principale

Modifiche al passo #3

Modifica in base a David-

Modifica approvata da David

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Locate the release tabs on both sides of the RAM.
[* icon_caution] Use non-conductive pointing tool or fingers to prevent static build up and damaging components.
[* red] Pull the metal tabs away from the memory to release it.
[* [* orange] Repeat for second memory module if needed.
[* [* orange] Repeat for second memory module if needed.
[* black] The memory module is on a hinge. Pull it up and then out to remove it.