Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Chad-

Modifica approvata da Chad

Eliminato
Aggiunto
Invariato

Righe Passo

[* blackred] Locate the release tabs on both sides of the RAM.
[* blackred] Locate the release tabs on both sides of the RAM.
[* icon_caution] Use non-conductive pointing tool or fingers to prevent static build up and damaging components.
[* redorange] Pull the metal tabs away from the memory to release it.
[* orange] Repeat for second memory module if needed.

[* black] The memory module is on a hinge. Pull it up and then outRAM away from clips to remove it.from device
[* icon_note] Repeat for second RAM if necessary
[* redorange] Pull the metal tabs away from the memory to release it.
[* orange] Repeat for second memory module if needed.

[* black] The memory module is on a hinge. Pull it up and then outRAM away from clips to remove it.from device
[* icon_note] Repeat for second RAM if necessary

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione