Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_note] At this point, the logic board is held onto the heat sink by thermal compound.
[* icon_note] You may need to gently pry with a spudger to separate the logic board from the heat sink.
[* icon_caution] Be very careful not to bend and break the logic board.
[*
black] Insert wisdom hereRemove the logic board from the heat sink.
[* icon_note] At this point, the logic board is held onto the heat sink by thermal compound.
[* icon_note] You may need to gently pry with a spudger to separate the logic board from the heat sink.
[* icon_caution] Be very careful not to bend and break the logic board.
[*
black] Insert wisdom hereRemove the logic board from the heat sink.