Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Walter Galan-

Modifica approvata da Walter Galan

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_reminder] Before you install your new front panel, you'll need to transfer the smart cover magnets on your '''OLD''' front panel to your new front panel.
[* black] Place the edge of a plastic opening tool on each side of the magnet near the top left corner of the front panel assembly.
[* black] Carefully wedge the edge of the right plastic opening tool underneath the magnet.
[* icon_note] Steadily hold the right plastic opening tool in place.
[* black] Wedge the left plastic opening tool underneath the magnet and simultaneously pry and push it towards the right plastic opening tool.
[* icon_caution] This will require some force as the smart cover magnet is held in place with strong adhesive.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto