Salta al contenuto principale

Modifiche al passo #7

Modifica in base a Nicolas Siemsen-

Modifica approvata da Nicolas Siemsen


Righe Passo

[* black] In the interest of preventing future corrosion consider also replacing the o-ring on the socket where it enters the housing.
[* black] On this car the o-rings were likely original and were fitting very loosely. They were likely allowing moisture to enter the housing.
[* black] Find a suitable replacement in your o-ring kit or at the local hardware store.
[* black] Coat the o-ring with a light coating of silicone grease to ease re-installation as the new o-ring may be a very snug fit. Also, the grease will help improve the seal and preserve the o-ring over time.

Immagine 1

Nessuna immagine precedente.