Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #8

Modifica in base a slimchance2001-

Modifica approvata da slimchance2001

Prima di
Dopo il
Invariato

Righe Passo

[* black] We should now have removed the 2 big flex cables attached to their respective and mutual boads. The 2 antenna wires and be removing the main logic board.
[* black] We can now start the process of removing the battery. Of all the things held down by adhesive in this device the battery is the most difficult thing to remove. Using a flat plastic pry tool pry up the edges of the battery and work you way to the middle from all sides
[* black] CAREFUL not to bend the battery to much i can not stress how well this battery is held in but be patient and just work at it
[* black] NOTE: when reassembling you could used a counter top and something flat to flatten the battery back out
[* black] The third pic is what we should have after the battery is removed

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto