Aggiusta le tue cose Community Store

Modifiche al passo #7

Modifica di Cole O'Neal —

Modifica approvata da Adam O'Camb

Prima di
Dopo il
Invariato

Righe Passo

-[* black] At the other end 2 big flex cables are brought together by a small control board. Disconnect the 2 clips (Green - LCD Orange - Digitizer) and, the other ends of the antennas. Then remove the antenna wires completely.
+[* black] At the other end, 2 big flex cables are brought together by a small control board. Disconnect the 2 clips (Green - LCD and Orange - Digitizer) and the other ends of the antennas. Then remove the antenna wires completely.
[* black] This small control board is also held down by a little adhesive, but can be carefully pried up.
-[* black] In the third picture, marked in the Green square is a piece of plastic that is kind of attached to the board. It is better to just pry it up with the board than disconnect it.
+[* icon_note] In the third picture, marked in the Green square, is a piece of plastic that is attached to the board. It is better to just pry it up with the board than disconnect it.