Modifiche al passo #3
Modifica in base a slimchance2001-
Modifica approvata da slimchance2001
- Prima di
- Dopo il
- Invariato
Righe Passo
[* black] With the back off reveals a familiar design that of the LG Nitro (P930) |
[* black] Using a Phillips #00 screw bit/driver remove all visible screws |
[* black] Dont worry about placement all the screws are the same except the one black screw I have marked with the red "o" |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto
Immagine 3
Nessuna immagine precedente.
Aggiunto